Remove AGL Remove Clearance Remove NOTAMs
article thumbnail

Drone Lingo Simplified: Acronyms Every Pilot Needs To Know

Pilot Institute

AGL Above Ground Level AGL is simply a way to tell the basis from which any given height or altitude is measured. Simply put, 400 feet AGL means that the 400 feet is measured from the underlying ground surface above the specific airspace. NOTAMs are publicly available.

article thumbnail

Is a Waiver to Fly Drones in Controlled Airspace Still Necessary?

Pilot Institute

Know what special scenarios still require a waiver, such as flying BVLOS operations, flights above people, or flights that exceed the standard 400 feet AGL. Aircraft must operate under ATC clearance. Shelf area: 10 NM radius, from 1,200 ft AGL to 4,000 ft AGL. ATC & Communication: No ATC clearance required for VFR.

AGL
Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

Pilot’s Guide to Special Use Airspace (SUA)

Flight Training Central

It’s important to check the NOTAMs if you’ll be flying around these areas as some of the dimensions change in size. If the restricted area is not active and has been released to the controlling agency, the ATC facility will allow the aircraft to operate in the restricted airspace without issuing specific clearance.

article thumbnail

What Are NOTAMs? Notices to Air Missions Explained

Pilot Institute

NOTAMs can be confusing and complicated to read. But you could find yourself in serious trouble if you don’t check NOTAMs before you take off. Luckily, you don’t have to stay puzzled by NOTAMs. This article breaks down each type of NOTAM, how to understand them, and where to find them. In the U.S.,

article thumbnail

Danger lurks in circling approaches

Air Facts

Any NOTAMS applicable? If you depart MDA on the downwind or base leg, you’re on your own as far as obstacle clearance. At what AGL altitude will the aircraft be in a stable/configured condition? (No Be fully configured and on speed prior to receiving landing clearance. Any aircraft inoperative items to consider?

article thumbnail

Pilot’s guide to special use airspace

Flight Training Central

It’s important to check the NOTAMs if you’ll be flying around these areas as some of the dimensions change in size. If the restricted area is not active and has been released to the controlling agency, the ATC facility will allow the aircraft to operate in the restricted airspace without issuing specific clearance.