article thumbnail

What are the Key Parts of a Plane?

WayMan

They also become familiar with systems like the Flight Management System (FMS) and transponder , which helps air traffic control identify and track aircraft. Empennage: The Tail Assembly Located at the back of the aircraft, the empennage (or tail assembly ) includes the vertical stabilizer , horizontal stabilizer , rudder , and elevator.

article thumbnail

This 1976 Bellanca 17-31ATC Viking Is a Fast, Head-Turning ‘AircraftForSale’ Top Pick

Flying Magazine

Such features, along with its strut-braced horizontal stabilizer, led some to regard the design as out of date. The Viking debuted in 1967 and continued to use a fabric-covered fuselage and plywood-skinned wing like its early predecessors. Its useful load is 839 pounds.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

We Fly: CubCrafters NXCub

Flying Magazine

inch display, GTR 20 comm, GTX 345R transponder, G5 attitude indicator, GDL 84 ADS-B package, Garmin dual-axis autopilot, and stereo intercom. There are gap seals between the elevator and horizontal stabilizer, and the rudder and vertical stabilizer.

article thumbnail

Incidents and accidents: AeroTime’s commercial airline safety roundup of 2024  

Aerotime

The left winglet of one of the aircraft collided with the right horizontal stabilizer and elevator of the other. The aircraft sustained damage to the leading edge of the right-hand horizontal stabilizer and was subsequently repaired. No hay heridos. There were no injuries to those onboard.

article thumbnail

Return to Form

Plane and Pilot

The previous CTs had a stabilator for pitch, where the new F2 uses a more conventional elevator and fixed horizontal stabilizer. With the F2, the rudder and vertical stabilizer are changed, with the rudder becoming a much smaller surface than before. Out back, theres an entirely new tail.