CFI Academy

MARCH 28, 2025

Heres what they are and what you need to understand about each: Crossed-Control Stall What It Is: This stall occurs when the aircraft is in a skidding turn, typically with ailerons applied in one direction and rudder in the opposite direction (e.g., left aileron, right rudder). How to Perform: Enter a turn (e.g.,

Aileron

Northstar VFR

MARCH 30, 2025

Make sure you're at the recommended altitude (600-1,000 feet AGL) per ACS guidelines. Maintain 600-1,000 feet AGL. Maintain 600-1,000 feet AGL. Lets take a look at these ground reference maneuvers: 1. Setup: Pick a reference pointsomething easy to see, like a water tower, large tree, or an intersection of roads.

Groundspeed

CFI Academy

MARCH 28, 2025

Here’s what they are and what you need to understand about each: Crossed-Control Stall What It Is: This stall occurs when the aircraft is in a skidding turn, typically with ailerons applied in one direction and rudder in the opposite direction (e.g., left aileron, right rudder). How to Perform: Enter a turn (e.g.,

Aileron

Pilot's Life Blog

JUNE 18, 2025

A power-off 180 is a critical maneuver that simulates an engine failure on final approach, requiring pilots to glide the aircraft and execute a precise 180-degree turn to a safe landing spot. Use ailerons and rudder together to maintain coordinated flight. Immediately pitch the aircraft to maintain the best glide speed.

Pilot

Flight Training Central

DECEMBER 4, 2023

The final approach speed for a soft field approach and landing should be the same as is used for a short field technique to minimuze float once you enter ground effect. If gusty conditions are present, increase final approach airspeed by one half the gust factor.

Approach