Remove Descent Remove Rudder Remove Runway
article thumbnail

Examining over 100 years of flight automation and the history of the autopilot

Aerotime

His system would provide an aircraft with automatic stability and control mechanism, through the control of the ailerons, stabilizer, and tail rudder through the use of a set of simple gyroscopes. The process of flight can be divided into seven crucial stages – taxi, take-off, climb, cruise, descent, approach, and landing phases.

article thumbnail

Step-by-Step Guide: How to Land a Piper Seminole Safely

Pilot's Life Blog

Learning how to land a Piper Seminole means becoming comfortable with these avionics, which help guide the aircraft through the landing procedure, ensuring optimal approach speeds and alignment with the runway. The pre-landing check is the first step in ensuring the aircraft is ready for a stable descent.

Descent 52
Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

The anatomy of a commercial flight – all you ever wanted to know: Part one  

Aerotime

Michael Derrer Fuchs / Shutterstock Once the pushback is complete and the engines are running, the crew will contact ATC again for taxi clearance, effectively asking the tower for the route they are required to follow and which taxiways to use to reach the active runway.

article thumbnail

Why Use a Checklist?

Plane and Pilot

Flight controls mean ailerons, elevator, and rudder, of course, but on some airplanes, if the trim is mis-set, the plane might be difficult or impossible to control. On my relatively high powered Vans RV-9A , flaps are not a critical item, unless the runway is short. Flight controls and engine controls are the obvious ones.

article thumbnail

Flying a Plane for the First Time: A Beginner’s Guide

Pilot's Life Blog

Aircraft Controls: Primary ControlsAilerons, Elevators, Rudder The three primary flight controls ailerons , elevators, and rudderare essential for piloting an aircraft. The rudder, also on the tail, adjusts yaw, which affects left and right turns. Ailerons, located on the wings, control the plane’s roll.

Aileron 52
article thumbnail

Flying a Small Plane: Key Insights for Beginners

Pilot's Life Blog

Primary Flight Controls The primary controls of a small plane are the yoke, rudder pedals, and throttle. Rudder pedals help manage yaw, which keeps the aircraft aligned during turns or crosswinds. Proper use of the throttle , maintaining alignment with the runway, and achieving the correct airspeed are essential steps.

Weather 52
article thumbnail

Your First 10 Hours of Flight Training: What to Expect

Inflight Pilot Training

Your instructor will introduce you to the basic components of the aircraft, including the fuselage, wings, ailerons, rudder, elevator, and landing gear. In addition to learning about the aircraft itself, you will also review airport procedures, runway markings, and basic safety guidelines.

Aileron 52